APPLICATION FOR ONE COMPONENT

Preparation

1. Gently push back cuticles.

2. Lightly buff nails, removing shine.

3. Dust off well with dust brush.

4. Wipe nails with Prep & Clean, using a lint free pad, to remove oils and dust and to disinfect.

5. Place nail forms under free edge of natural nails (follow Application with Nail Forms), or apply tips (follow Application with Tips).

Application

1. Apply a thin even layer of One Component over prepared natural nail, or on a blended tip (if extending).  Be sure not to get any product on the cuticle.

2. Cure 2 minutes in light unit.  Repeat on other hand.

3. DO NOT REMOVE the dispersion film, it ensures proper adhesion to 2nd Coat.

4. Apply a 2nd thicker coat over the first; stay clear of cuticle and sidewalls.

5. Cure 2 minutes in light unit.  Repeat on other hand.

6. DO NOT REMOVE the dispersion film, it ensures proper adhesion to 3rd Coat.

7. Repeat with 3rd coat, thinner than your second, but thicker than your first, as a sealer layer.  Being sure again not to get product on the cuticle.

Cure and wipe off dispersion film with Prep & Clean.  If product is applied smooth enough you will find no filing or sealing will be necessary.

However, if you need to perfect the finished shape, just file to refine product shape or surface, buff smooth, and clean with Prep & Clean. Finally apply Sealer again in usual manner, as described above.

If using One Component for a French fill, apply Ultra White Fill after the first thin coat.  Cure, and then apply the 2nd coat…etc.

If your clients want any special nail art applications, rhinestones, 3D stickers, etc., they should normally be applied before you cure the last coat of One Component, Colour Gel or Sealer.