APPLICATION FOR ULTRA WHITE FILL

Preparation

1. Gently push back cuticles.

2. Lightly buff nails, removing shine.

3. Carefully file away any loose product, as this could be a lifting risk.

4. File down a “ledge” from the natural nails’ smile line to the end of the free edge, leaving some modeling resin or One Component on the nail.

5. Reshape entire nail (curve and length).

6. Buff nails smooth for best application

7. Dust off well with a dust brush.

8. Wipe nails with Prep & Clean, using a lint free pad, to remove oils, dust and to disinfect.

Application

1. Apply a thin layer of Ultra White Fill to the “ledge”, like a polish application.

2. Using a clean, dry brush, keep the brush flat to the natural nails smile line; create a crisp “French” smile line.

3. Cure for 2 minutes.  Repeat on other hand.

4. DO NOT REMOVE the dispersion film, it ensures proper adhesion to Modeling Resin.

5. Apply 2 coats of Modeling Resin or One Component.

6. Wipe off dispersion film with Prep & Clean, using a lint free pad.

7. Gently file, shape and buff nails if necessary.

8. Wipe nails with Prep & Clean, using a lint free pad.

9. Dust off with dust brush, to remove any lint (optional).

10. Apply Sealer.

NOTE: Because of its consistency, you cannot build with the Ultra White Fill, therefore; you can only use this product when doing a fill on your client.  If you need to build the free edge, then you will need to use the French Modeling Resin.